The benefits of the FirePoint-2 fire alarm control panel.
Guest houses,
hotels, hostels
and HMOs (houses
of multiple occupancy). Minimum décor disturbance. The exact source of
any alarm is immediately pinpointed. An alarm sounder can be fitted in every
bedroom without extra cable cost.
Offices,
factories, warehouses
and clubs. These often require very
long cable runs so you save lots of time and lots of money because the FirePoint-2
uses less cable than a conventional fire alarm.
Schools,
halls and churches.
This type of building commonly has cabling already installed on account of a previous
fire alarm system. When you replace the former system with a Firepoint-2
you can possibly re-use the existing cables. Please ask us if you need advice.
With the FirePoint-2 fire alarm control panel, the
detectors and the alarm sounders are connected to the same cable. This means
that your cable costs are halved.
Because the FirePoint-2 needs only half the cable
of a conventional system, the time needed to complete the installation is also
reduced.
A FirePoint-2 system has many features that can
be used to make servicing and maintenance quicker and simpler.
Every FirePoint-2
has an optional "service reminder" feature that can be set by the installer
if desired. When this feature is used, the FirePoint-2 control panel will give
a gentle but timely reminder to the building occupiers when the next periodic
service is due. This means that you can be sure that the FirePoint-2 will
be regularly serviced.
The installer doesn't have to call the customer
to remind them of the need for a service - the FirePoint-2 will remind them when
the time comes. One installer described
this feature as a "fantastic idea".